Howard Lighting VSA4A332ALEMV000000I VSA4 Series 32W 32 Watt T8 3 Lamp Low BF Instant Start Ballast Vaporproof Strip Fluorescent Fixture

Howard Lighting VSA4A332ALEMV000000I VSA4 Series 32W 32 Watt T8 3 Lamp Low BF Instant Start Ballast Vaporproof Strip Fluorescent Fixture

  • $96.28


ContractorsCommercial Input:
The Howard Lighting VSA4 Series 4-foot fluorescent vaporproof strip fixture stays dust- and moisture-free thanks to a crack- and leak-proof upper body and closed cell polyester gasket. The fixture operates up to three T8 or T5HO lamps, and comes standard with a Howard ballast. Easily install the fixture with brackets that install first and then snap securely on to the fixture. And enjoy easy access to the wiring compartment and ballast via a removable gear tray.

Features

Housing
*One-piece upper body; no seams to crack, break, or leak
*Reinforced fiberglass body is rugged and corrosion resistant
*5VA Flammability Rating
*White plastic latches standard
*Eight latches for positive lens retention
*Latches designed to accept screws to make enclosure tamper resistant -- White Polycarbonate latches accepts #4 - 1/2” screw; Stainless steel latches accepts #6 - 3/8” screw (optional)
*White polyethylene molded end plugs for use as knockouts
*High gloss, baked enamel reflective front

Gasket
*Closed cell polyester gasket
*Poured gasket seamlessly fills channel for maximum seal
*Gasket has dry skin that will not stick to the mating surface
*High gasket compression recovery ensures a solid seal over life of fixture

Diffuser
*Injection molded for maximum strength and precise detail
*Lineal prisms on sides reduce glare
*Continuous formed perimeter provides for positive seal
*Materials:
-Option A: 100% Virgin Impact Resistant Acrylic
-Long lasting clarity and resistance to weathering
-Option P: UV Stabilized Polycarbonate
-Maximum impact resistance
-Option D: Deep Lens, Impact Resistant Clear Acrylic with diffused ends
-Option F: Deep Lens, Impact Resistant Frosted Acrylic

Installation
*Shipped fully wired with Howard ballast
*Easy access to wiring compartment and ballast via removable gear tray
*Gear tray tethered to housing by two lanyards for extra safety
*Knockouts on each end
*Spring-mount, stainless steel bracket allows for surface or chain mount
*Brackets Install first, then snap securely onto fixture
*NEC compliant luminaire power disconnect standard Ballast
*Electronic, Inherent Thermal Protection, Class P, Sound rated A
*UL Listed

Quality Assurance
*System Tested, Designed, Approved, and Manufactured by Howard Lighting Products in Mendenhall, Mississippi.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question