Howard Lighting VSA4A332ASEMV000000I VSA4 3 Lamp T8 Fluorescent Enclosed Vapor Dust Water Proof Tight Light Fixture NSF IP67

Howard Lighting VSA4A332ASEMV000000I VSA4 3 Lamp T8 Fluorescent Enclosed Vapor Dust Water Proof Tight Light Fixture NSF IP67

  • $91.98
  • Save $0.01


ContractorsCommercial Input:
The Howard Lighting VSA4 Series vaporproof fluorescent strip provides dust- and moisture-free illumination. The four-foot strip operates three lamps for entrance lighting, parking structures, car washes, construction sites and industrial lighting. The one-piece body is made of reinforced fiberglass, and it's shipped fully wired with a Howard ballast.

Housing
• One-piece upper body; no seams to crack, break, or leak
• Reinforced fiberglass body is rugged and corrosion resistant
• 5VA Flammability Rating• Clear polycarbonate latches standard
• Fourteen latches for positive lens retention
• Latches designed to accept screws to make enclosure tamper resistant
- Polycarbonate latches accepts #4 - 1/2” screw
- Stainless steel latches accepts #6 - 3/8” screw
• White polyethylene molded end plugs for use as knockouts
• High gloss, baked enamel reflective front

Gasket

• Closed cell polyester gasket
• Poured gasket seamlessly fills channel for maximum seal
• Gasket has dry skin that will not stick to the mating surface
• High gasket compression recovery ensures a solid seal over life of fixture

Diffuser
• Injection molded for maximum strength and precise detail
• Lineal prisms on sides reduce glare
• Continuous formed perimeter provides for positive seal
• Materials:

     100% Virgin Impact Resistant Acrylic
      Long lasting clarity and resistance to weathering

• Acrylic/DR blend for superior impact resistance, long life and clarity
• Ribbed geometry designed for maximum strength
• Continuous formed perimeter provides for positive seal


Installation

• Shipped fully wired with Howard ballast
• Easy access to wiring compartment and ballast via removable gear tray
• Gear tray tethered to housing by two lanyards for extra safety
• Knockouts on each end
• Spring-mount, stainless steel bracket allows for surface or chain mount
• Brackets Install first, then snap securely onto fixture
• NEC compliant luminaire power disconnect standard

Ballast
• Electronic, Inherent Thermal Protection, Class P, Sound rated A
• UL Listed


Quality Assurance

• System Tested, Designed, Approved, and Manufactured by Howard Lighting

Products in Mendenhall, Mississippi.

Applications

  • Entrance Lighting
  • Car Washes
  • Public Access
  • Parking Structions
  • Beverage Industry
  • Food Processing
  • Construction Sites
  • Industrial Lighting

Certifications
IP67 NSF 

 

  • Metal Halide [HID] Equivalent
    100 Watt HID
  • Mounting Height
    11 - 13 Feet
  • Type of Area
    Hangers & Storage, Industrial & Warehouse, Parking Garage
  • Ballast Factor
    Normal .87-.88
  • Certifications
    IEC, NSF, UL Listed
  • Number of Lamps
    3 Lamp
  • Dimensions
    51.6" L x 7.33" W x 4.13" H
  • Length
    51.60"
  • Width
    7.33"
  • Height
    4.13"
  • Lumen Output:
    8700 lumens
  • Manufacturer
    Howard Lighting
  • Manufacturer's Warranty
    1 Year
  • Part Number
    VSA4A332ASEMV000000I
  • Technology
    T8 Fluorescent
  • Voltage
    Multivolt 120V-277V
  • Wattage
    96 Watt
  • Weight Each
    9.00 lbs
  • Bulb Type
    Linear Tube
  • Beam Angle
    Normal

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question